Adjust Opener Limits

Having a new garage door opener installed is an important venture. It guarantees that your garage door will open and close smoothly and safely every time as long as it is properly maintained. You are given the freedom of choosing whether you want a chain, belt, or screw opener, whether you would prefer a name brand such as Genie or LiftMaster, and multiple other aspects of what opener you would prefer. It’s not just an opener, it’s your opener. However, it is easy to overlook the limits set on the garage door opener. Did you know how far up or down your garage door opener takes the door?

Adjust Opener Limits

If you notice that every time you attempt to open or close your garage door it’s either not performing a full cycle (i.e. opening/closing halfway) or reverses its motion mid-cycle, you may have to adjust the limits of your garage door opener. In order to adjust the limits, first locate the limit adjustment screws on the opener and retrieve a corresponding flathead or Phillips head screwdriver for them. Cycle your door one time by opening and closing it. If the door does not open completely and stops at about 5 feet (typically the halfway mark), turn the “Up” adjustment screw clockwise one full turn. Every complete turn of the screw corresponds to two inches of movement. Continue to turn the screw until you are able to fully open the door.

garage door repair madison wi

If the door will not close completely, turn the “Down” adjustment screw counterclockwise one full turn. Again, each full turn will add two inches of movement to the door, so continue to turn the screw until the door fully closes. If the door closes fully but reverses its motion after touching the ground, turn the “Down” adjustment screw clockwise until you are able to close the door without it attempting to open up on its own. For any of the above methodologies, be certain to open and close the door after each full turn of an adjustment screw. If you are still having issues with your opener’s limits after trying all of the above, be sure to contact your local garage door company.